This is a quality, simple mains energiser. It can power up to 8000 metres of single strand fencing or 4000 metres of dual strand. Due to the energiser being mains wired it should be housed in a dry building. Maximum output energy 1.3J. Maximum voltage 6500v, mains 230v. Suitable for horses and pets.
If this is your first mains unit, a mains wiring kit would be required for this, see code 41002.
* M100 mains energiser
* 8000 metres single strand
* 4000 metres double strand
If you want power for your fencing our range of energisers provide ample coverage and simplicity of operation.
For other battery alternatives see code: 41330 or 41307
Here are the Top Ten rules to make your electric fence work properly!
1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.
2 Make sure that the earthing is optimal.
3 Do not connect two conductive plastic wires by tying them – Use special conductors.
4 Fence wire/tape/rope must not be broken.
5 Use conductive material having the best possible conductivity – i.e. Low resistance.
6 Keep fence wire and earthing rod free from rust – Rust is an insulator.
7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.
8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.
9 With battery-driven energisers, check battery condition regularly.
10 Ensure that each point of the fence is live using an electric fence tester.