This solar powered energiser unit could do away with the need for a leisure or replacement back-up lantern batteries.
It has a rechargeable 12 volt 7 A-HR sealed lead acid battery housed in the space previously used by the back-up batteries inside the CP250 main unit. This is charged by a 6 watt solar panel.
The solar panel fastens to the top of the energiser unit and can be adjusted to the correct angle to maximise the rays of the sun. An integral earthing stake and connecting wire to the fence are provided.
The CP250 Constant Power Energiser features a patent circuit, as the battery runs down, the output from the energiser will remain the same. Power output is 12V 0.25J. This means the electric fence will be working at 100% all of the time, right up to the point when the battery needs replacing. The CP250 unit can provide instant power output for up to 4000 metres of single strand fencing and up to 2000 metres of dual strand fencing.
* CP250 energiser
* Patent circuit
* Output level remains constant
* Instant power
* 4000 metres single strand
* 2000 metres double strand
* Battery low indicator
* Fence line indicator
* Output indicator
* Integral earth stake
* Carrying handle
* Fence connecting wire
If you want power for your fencing our range of energisers provide ample coverage and simplicity of operation.
Here are the Top Ten rules to make your electric fence work properly!
1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.
2 Make sure that the earthing is optimal.
3 Do not connect two conductive plastic wires by tying them – Use special conductors.
4 Fence wire/tape/rope must not be broken.
5 Use conductive material having the best possible conductivity – i.e. Low resistance.
6 Keep fence wire and earthing rod free from rust – Rust is an insulator.
7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.
8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.
9 With battery-driven energisers, check battery condition regularly.
10 Ensure that each point of the fence is live using an electric fence tester.