This retrofit system is designed to transform your existing 12 volt rechargeable battery-powered energiser to solar power. 6 watt for energisers up to 1J, and 9 watt for energisers up to 1.5J. It simply clips on to your existing 12 volt wet cell rechargeable battery and as long as the battery is fully charged before connecting the solar panel, it will maintain, extend and prolong the battery life on any fence energiser. Better security as fence stays alive longer. Lower cost with less charging time. Please note that the unit will not save a dying battery and the fence should be monitored on a regular basis.
* Solar power
* 6 watt for up to 1J
* 9 watt for up to 1.5J
* Clip onto existing battery
* Maintains charge
* Lower cost
* Better security
If you want power for your fencing our range of energisers provide ample coverage and simplicity of operation.
Here are the Top Ten rules to make your electric fence work properly!
1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.
2 Make sure that the earthing is optimal.
3 Do not connect two conductive plastic wires by tying them – Use special conductors.
4 Fence wire/tape/rope must not be broken.
5 Use conductive material having the best possible conductivity – i.e. Low resistance.
6 Keep fence wire and earthing rod free from rust – Rust is an insulator.
7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.
8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.
9 With battery-driven energisers, check battery condition regularly.
10 Ensure that each point of the fence is live using an electric fence tester.